Sauer QD Hexalock Mount 30 mm, Sauer, Remington
Na zalihi

Sauer QD Hexalock Mount 30 mm, Sauer, Remington

(1 ocjene)
Vrijeme otpreme
Slanje - 1 do 3 dana
Mogućnost povrata
15 dana
1 2 3 4 6
Zatvori

Pomoć oko dostave

Odaberite zemlju dostave i pružatelja dostave

Vaša odabrana lokacija bit će spremljena i dok pregledavate druge proizvode. Prilikom završetka kupnje moći ćete birati između više vrsta plaćanja.

Korisnička pomoć

Naš iskusni tim spreman vam je pomoći kroz cijeli proces, od kupnje do korištenja proizvoda. Ako imate pitanja, molimo vas da nas kontaktirate.
Kontaktirajte nas

Sauer QD Hexalock Mount 30 mm, Sauer, Remington Opis proizvoda

About the company

Sauer & Sohn, frequently referred to as Sauer, is Germany's oldest firearms manufacturer and the second oldest in the world, founded in 1751. Even though they have been around for nearly three hundred years, they remain innovative. One of their most known firearms is Sauer 38H, an advanced semiautomatic pistol that was produced in great numbers – it featured a cocking/decocking lever.

About the rifle

Sauer 101 comes with the slogan “old school, new rules” which greatly describes the rifle. The bolt is designed traditionally while the barrel is attached to the receiver in a completely new, modern way. Sauer is known for the smoothness of its actions and Sauer 101 is no exception. There are two holes on each of the two mounting surfaces. Plenty of models are available: Select, Artemis, Forest, Forest XT, Classic, Classic XT, Scandic, Alaska and GTI.

The rifles are chambered for different calibers:

  • Select, Classic, Classic XT, Alaska, GTI: .22-250 Rem., .243 Win., 6.5x55 SE, .270 Win., 7x64, .308 Win., .30-06 Sprg., 8x57 IS, 9.3x62, 7 mm Rem. Mag., .300 Win. Mag., .338 Win. Mag.

  • Artemis, Scandic, Forest: .243 Win., .270 Win., .308 Win., 7x64, .30-06 Sprg., 8x57 IS, 9.3x62

  • Forest XT: .308 Win., .30-06 Sprg., 8x57 IS, 9.3x62

About the mounting system

  • Sauer QD Hexalock mounting system is ideal for Sauer 100 and 101 but it also fits other rifles with the same dimensions such as Mauser M18, Remington 700, Howa 1500, Mauser M96, Rosler Titan 16, Sabatti Rover LA and Haenel Jager 10.

  • Hexalock is a two-piece mount which means that is not as rigid as one-piece mounts.

  • It is very light and entirely made out of steel. It has a perfect return to zero which means that you do not have to repeat the zeroing process if you detach and reattach it.

  • Hexalock is quickly-detachable and very easy to handle.

Mounting instructions

  • Firstly, the user positions the bases on the appropriate places on the rifle’s receiver. Then, the bases are glued with a suitable adhesive (Loctite Blue). The Hexalock mounting bases must be aligned in the direction of the loading opening so that there is just a small gap.

  • Afterwards, the rings are placed on the Hexalock mounting bases. The user has to position the lever so that it points forward to the left. The stop pin must rest against the lower half of the mounting ring.

  • The user now loosens the screws that connect the upper and the lower part of the ring so that the upper part can be taken off. It is recommended that the rings are fastened to the telescopic sight and that a suitable adhesive is used to glue the screws.

  • The telescopic sight is then placed on the bottom parts of the rings. The user reinstalls the upper parts of the rings and tightens up the screws. There must be a same size gap on both sides between the upper and bottom parts of the rings. The screws have to be tightened with a force of 2.2 Nm.

It is important that the user is extremely precise when mounting Hexalock. It is very hard to horizontally align both rings and achieve the same height so it may be best to let a professional do the mounting. Even gunsmiths are sometimes having trouble achieving the right height and alignments.

Warranty

The product has a warranty period of 2 years.

Opća svojstva

Proizvođač Sauer
Serija montaže Sauer Hexalock
Izrađeno u Njemačka
Jamstvo 2 godini
SKU SAUER80209089

Fizička svojstva

BH visina. 18.00 mm
H visina. 33.00 mm
Umetak (KR) KR 0.0 mm
Nagib nosača 0 MOA
Nastavitev po smjeri Ne
Vrsta nišanskog uređaja 30 mm
Boja Crna
Materijal Čelik

Najčešća pitanja (Q&A)

Trebate li pomoć? Jeste li sigurni da je ovo pravi proizvod za vas? Ne oklijevajte - postavite pitanje našoj ekipi, koja je tu da vam pomogne oko pitanja o proizvodu.

Trebam nosače Sauer Exalock od 30 mm za Sauer 100, za montiranje nišana Zeiss 3-12X44. Nisam siguran trebaju li mi srednji ili visoki nosači. Možete li molim vas savjetovati. Hvala vam

I need a 30mm Sauer Exalock mounts for a Sauer 100 , mounting a Zeiss 3-12X44 rifle scope. I am not sure if a need a medium or high mounts. Can you please advise. Thank you

od Elvio

Dragi Elvio,

hvala na vašoj poruci.

Za vašu kombinaciju trebat će vam nosač s najmanje 10 mm BH.

Zahvaljujemo na razumijevanju i slobodno nam se obratite na [email protected] ako vam možemo pomoći na bilo koji drugi način.

Lijepi pozdrav

Dear Elvio,

thank you for your message.

For your combination, you will need a mount with at least 10 mm BH.

Thank you for your understanding and please do not hesitate to contact us at [email protected] if we can assist you in any other way.

Kind regards

od Optics Trade team

Bok, koliko brzo mogu ovo isporučiti u Ujedinjeno Kraljevstvo? Sauer QD Hexalock nosač 30 mm, Sauer, Remington

Hi, how quickly could I get these delivered to the Uk ? Sauer QD Hexalock Mount 30 mm, Sauer, Remington

od Mark

Dragi Mark,

hvala na vašoj poruci.

Ovaj nosač je trenutno na zalihi i spreman je za otpremu.

Zahvaljujemo na razumijevanju i slobodno nam se obratite na [email protected] ako vam možemo pomoći na bilo koji drugi način.

Lijepi pozdrav

Dear Mark,

thank you for your message.

This mount is currently in stock and ready for shipment.

Thank you for your understanding and please do not hesitate to contact us at [email protected] if we can assist you in any other way.

Kind regards

od Optics Trade team

Imam meoptu 3-12 56 postoji li razlika u visini nosača opsega???. želim hexalock za M18 Mauser

i have a meopta 3-12 56 is ther a difference in the hight off the scopemounts???. i want the hexalock for the M18 Mauser

od Iwan

Dragi Ivane,

hvala što ste nas kontaktirali.

BH visina ovog nosača je 18 mm što će biti dovoljno za montažu vašeg Meopta 3-12x56 nišana.

Ako imate dodatnih pitanja ili nedoumica, ne ustručavajte se kontaktirati nas izravno na [email protected]. Ovdje smo da pomognemo.

Lijepi pozdrav,

Dear Iwan,

thank you for contacting us.

The BH height of this mount is 18 mm which will be enough for your Meopta 3-12x56 scope to mount.

If you have any further questions or concerns, please do not hesitate to contact us directly at [email protected]. We are here to help.

Kind Regards,

od Optics Trade team

Pozdrav, je li moguće digitalizirati i poslati mi kompletan priručnik za hexalock nosače? Trenutno nema dostupnih slika. Hvala vam!

Hello, Is it possible you can digitalize and send me the compleet manual of the hexalock mounts ? Ther are no pictures available now. Thank you!

od Berend

Dragi Berend,

hvala što ste nas kontaktirali.

PDF hexalock nosača možete pronaći ispod slike nosača na stranici proizvoda.

Ako trebate bilo kakvu daljnju pomoć, nemojte se ustručavati ponovno nas kontaktirati.

Lijepi pozdrav.

Dear Berend,

thank you for contacting us.

You can find the PDF of the hexalock mount under the picture of the mount on the product page.

Should you require any further assistance, please do not hesitate to contact us again.

Kind regards.

od Optics Trade team

Bok, tražim set Hexalocka s prstenovima od 30 mm. Još uvijek ih možete nabaviti? Vidim mjesec ili više, ali nisam siguran hoće li Sauer obnoviti zalihe. Živjeli.

Hi I am after a set of Hexalock with 30 mm rings. Are you still able to get these? I see one month or more but no too sure if Sauer will replenish stock. Cheers.

od Gabriel

Dragi Gabriele,

hvala što ste nas kontaktirali.

Molimo vas da nas kontaktirate izravno na [email protected] za informacije o roku isporuke.

Lijepi pozdrav,

Dear Gabriel,

thank you for contacting us.

We would kindly ask you to contact us directly at [email protected] for information on the delivery time.

Kind Regards,

od Optics Trade team

Imam bazu, ali su mi trebali prstenovi samo za drugačiji opseg. Dakle, mogu kupiti samo prstenje od 30 mm. Hvala

I do have a base but I needed rings only for different scope. So can I purchase 30 mm rings only. Thanks

od Optics Trade team

Dragi William,

hvala što ste nas kontaktirali.

Nažalost, Sauer nudi samo kompletan Hexalock nosač (baze + prstenovi).

Ako imate dodatnih pitanja ili nedoumica, ne ustručavajte se kontaktirati nas izravno na [email protected]. Ovdje smo da pomognemo.

Lijepi pozdrav,

Dear William,

thank you for contacting us.

Unfortunately, Sauer only offers the complete Hexalock mount (bases + rings).

If you have any further questions or concerns, please do not hesitate to contact us directly at [email protected]. We are here to help.

Kind Regards,

od Optics Trade team

Nedavno sam naručio neke hexalock prstenove i isporučeni su vrlo brzo, ali je nedostajao vijak s prstenom. Možete li mi, molim vas, poslati jedan?

I recently ordered some hexalock rings and they were delivered very quickly, but it was missing ring screw. Could you send me one please?

od Keith

Dragi gospodine Keith,

hvala što ste nas kontaktirali.

Ljubazno vas molimo da nas kontaktirate izravno na adresu [email protected] u vezi s ovim pitanjem.

Lijepi pozdrav,

Dear Mr. Keith,

thank you for contacting us.

We would kindly ask you to contact us directly at [email protected] mail regarding this matter.

Kind Regards,

od Optics Trade team

Pozdrav, upravo sam kupio hexalock nosač za Sauer 100 od 30 mm, želio bih potvrditi da je za set od dva, a ne samo za jedan. Dva prstena i dva nosača. Hvala vam

Hello I just purchased the hexalock mount for Sauer 100 in 30mm , I would like to confirm that it is for a set of two not just one . Two rings and two mounts . Thank you

od Mike

Dragi gospodine Mike,

hvala što ste nas kontaktirali.

Ovo je dvodijelni nosač koji se sastoji od dva prstena od 30 mm i dvije baze za pušku Sauer 100.

Ako imate dodatnih pitanja ili nedoumica, ne ustručavajte se kontaktirati nas izravno na [email protected]. Ovdje smo da vam pomognemo.

Lijepi pozdrav,

Dear Mr. Mike,

thank you for contacting us.

This is a two-piece mount that consists of two 30 mm rings and two bases for the Sauer 100 rifle.

If you have any further questions or concerns, please do not hesitate to contact us directly at [email protected]. We are here to help.

Kind Regards,

od Optics Trade team

hoće li sauer hexlock nosač raditi s nišanom Primary Arms GLx 4-16x50FFP - osvijetljenim ACSS-Apollo-6.5CR/.224V

will the sauer hexlock mount work with a Primary Arms GLx 4-16x50FFP Rifle Scope - Illuminated ACSS-Apollo-6.5CR/.224V

od Gary

Poštovani gospodine,

hvala što ste nas kontaktirali.

Ljubazno vas obavještavamo da je nosač prikladan za ovaj nišan.

Lijepi pozdrav

Dear Sir,

thank you for contacting us.

We kindly inform you that the mount is suitable for this riflescope.

Kind regards

od Optics Trade team

Je li ovo samo za prstenove od 30 mm ili uz njih dolaze i baze? Imate li ih i s prstenovima od 25 mm bez baze?

Is this just for the 30mm rings or do the bases come with ? Do you also have them with 25mm rings no bases ?

od Mark

Poštovani gospodine, 

hvala na vašem upitu.

Trenutno nudimo samo kompletne Sauer nosače s uključenim bazama. Ako tražite nosač s prstenovima od 25,4 mm, možete ga pronaći ovdje: 

Sauer QD Hexalock nosač 25,4 mm, Sauer, Remington - Optika-trgovina

Ako vam je potrebna dodatna pomoć, nemojte se ustručavati kontaktirati nas ponovo.

Lijepi pozdrav 

Dear Sir, 

thank you for your inquiry. 

We currently only offer complete Sauer mounts with bases included. If you are looking for the mount with 25.4 mm rings, you can find it here: 

Sauer QD Hexalock Mount 25.4 mm, Sauer, Remington - Optics-Trade

Should you require any further assistance, please do not hesitate to contact us again. 

Kind regards 

od Optics Trade team

Možete li objasniti kako podešavamo same prstenove? Moji stražnji prstenovi dobro pristaju, no prednji prsten je nemaran. Poluga ga ne čini čvrstim kako bi trebao biti. Vidim da postoji mala rupa na donjoj strani prstena pored središnjeg vijka. Ne mogu vidjeti što je unutra. Je li to točka prilagodbe? Ako da, koja je metoda prilagodbe? Je li to hex ili torx ili ravna glava ili neki drugi način? drugo, ako bih želio kupiti drugi set prstenja, ali u 1" umjesto mojih 30 mm, je li to moguće i ako da, koliko i kada ću dobiti? Hvala

Can you please explain how do we adjust the rings themselves? My rear rings fit snugly however the front ring is sloppy. The lever doesn't make it snug as it should be. I see there is a small hole in the underside of the ring next to the centre screw. I cannot see what is inside. Is it an adjustment point ? If so what is the method of adjustment? Is it a hex or torx or flat head or some other means? secondly if I wanted to buy a second set of rings but in 1" instead of my 30mm is this possible and if so how much and how soon to get ? Thanks

od Mark

Poštovani kupče,

Zbog specifične prirode vašeg zahtjeva, ljubazno vas molimo da nas kontaktirate na [email protected] u vezi s ovim problemom . Jedan od naših vještih prodavača spremno će vam pomoći.

Lijepi pozdrav,

Dear Customer,

Due to the specific nature of your request, we kindly ask you to contact us at [email protected] regarding this issue. One of our skilled salespeople will readily assist you.

Kind regards,

od Optics Trade team

Stvarno me zanimaju nosači, prodajete li ih same?

I'm really just after the mounts do you sell them on their own?

od James

Poštovani gospodine,

Zahvaljujemo na vašem upitu.

Nažalost, ne prodajemo baze za ovaj proizvod (Sauer QD Hexalock nosač 30 mm, Sauer, Remington), samo kompletan nosač.

Ako vam je potrebna dodatna pomoć, nemojte se ustručavati ponovno nas kontaktirati.

Lijepi pozdrav,

Dear Sir,

Thank you for your inquiry. 

Sadly, we do not sell bases for this product (Sauer QD Hexalock Mount 30 mm, Sauer, Remington), only the complete mount.

Should you require any further assistance, please do not hesitate to contact us again.

Kind regards,

od Optics Trade team

Bok, zanima me Sauer QD Hexalock nosač 30 mm, Sauer, Remington. Samo provjeravam je li ovo cijena za par njih i jesu li ispravne visine za daljnogled s objektivom od 50 mm? Imam Sauer 101 i kahles helia 2-10x50

Hi I’m interested in the Sauer QD Hexalock Mount 30 mm, Sauer, Remington. Just checking that this is the price for a pair of them and would they be the correct height for a scope with a 50mm objective lense? I’ve got a Sauer 101 and a kahles helia 2-10x50

od ryan

Poštovani gospodine,

hvala na vašem upitu. Ovo je doista cijena za njihov par, prstenje bi trebalo dobro pristajati prema informacijama koje ste dali.

Ako vam je potrebna dodatna pomoć, nemojte se ustručavati ponovno nas kontaktirati.

Lijepi pozdrav,

Dear Sir,

thank you for your inquiry. This is indeed the price for a pair of them, the rings should be good fit judging by the information you've provided.

Should you require further assistance, please do not hesitate to contact us again.

Kind regards,

od Optics Trade team

Pozdrav, tražio bih set motntazo donjih i gornjih dijelova za Mauser m18 i nišan sa cijevi od 30 mm

Pozdravljeni, Potreboval bi komplet motntazo spodnji in zgornji del za mauser m18 in dalnogled s tubo 30mm

od Roman

Dragi Romane,

Hvala na poruci.

Predlažemo Picatinny šinu: https://www.optics-trade.eu/int/mounts/shopby/ring_diameter-picatinny_rail/suitable_for_mauser-mauser_m18.html

i 30 mm prstenovi za picatinny šinu: https://www.optics-trade.eu/int/mounts/shopby/ring_diameter-30_mm/suitable_for_rails-picatinny_rail.html

Ako imate još pitanja, pišite nam na [email protected]

Pozdrav,

Spoštovani Roman,

hvala za sporočilo.

Predlagamo vam picatinny letev: https://www.optics-trade.eu/int/mounts/shopby/ring_diameter-picatinny_rail/suitable_for_mauser-mauser_m18.html

in 30mm obročki za picatinny letev: https://www.optics-trade.eu/int/mounts/shopby/ring_diameter-30_mm/suitable_for_rails-picatinny_rail.html

Če boste imeli še kakšno vprašanje nam pišite na [email protected]

Lep pozdrav,

od Optics Trade team

Zdravo Evo, nakon hexa lock 30MM prstenova za mauser m12. imate li ove na zalihi? Nemate izbora za odabir m12/m98. sauer 100 itd. ne odgovaraju akciji m12/m98.

HI There, after the hexa lock 30MM rings for mauser m12. do you have these in stock? Have no selection to choose m12/m98. the sauer 100 etc do not fit the action of m12/m98.

od Andrew

Poštovani gospodine,

hvala što ste nas kontaktirali.

Nažalost, nemamo.

Ako vam je potrebna dodatna pomoć, nemojte se ustručavati ponovno nas kontaktirati.

Lijepi pozdrav

Dear Sir,

thank you for contacting us.

Unfortunately, we do not. 

Should you require any further assistance, please do not hesitate to contact us again.

Kind regards

od Optics Trade team

ali ta montaža paše na bergaro b14 timber kal.308 win.

od istok

Dobar dan,

Zahvaljujemo na vašem pitanju.

Montaža bez problema odgovara puški Bergara B14.

U slučaju dodatnih pitanja, stojimo vam na raspolaganju u svakom trenutku.

Pozdrav,

Lepo Pozdravljeni,

zahvaljujemo se Vam za Vaše vprašanje.

Montaža ustreza puški Bergara B14 brez težav.

V primeru kakršnihkoli dodatnih vprašanj smo Vam kadarkoli na voljo.

Lep Pozdrav,

od Optics Trade team

Pozdrav, imam Sauer 100 Classic. Hoće li vaša hexalock montaža odgovarati? Također Mogu li dobiti dodatne prstenove za svoje optike?

Hello I have a Sauer 100 Classic. Will your hexalock montage fit? Also Can i get extra rings for my scopes?

od Hans

Poštovani gospodine,

hvala što ste nas kontaktirali.

Možemo potvrditi da Sauer QD Hexalock s prstenovima od 30 mm bez problema odgovara Saueru 100/101. Nažalost, prstenje ne prodajemo zasebno.

Zahvaljujemo na razumijevanju.

Ako trebate bilo kakve dodatne informacije, nemojte se ustručavati ponovno nas kontaktirati.

Lijepi pozdrav

Dear Sir,

thank you for contacting us.

We can confirm that the Sauer QD Hexalock with 30mm rings will fit to Sauer 100/101 with no problem. Unfortunately, we do not sell rings separately.

Thank you for your understanding.

If you will need any additional information please do not hesitate to contact us again.

Kind Regards

od Optics Trade team

Priča se da je Hexalock prstenje napravio Sauer. Hoće li odgovarati Mauser M12? Dolaze li prstenovi koje ste vi isporučili s bazama? Postoji li nešto što ukazuje na samo prstenje da je prstenje napravio Sauer?..Ne želim ime Sauer na mom Mauseru :).

The Hexalock rings are said to be made by Sauer. Will they fit a Mauser M12? Do the rings supplied by you, come with bases? Is there anything to indicate on the rings themselves that the rings are made by Sauer?..I don't really want the Sauer name on my Mauser:).

od Michael

Poštovani gospodine,

hvala što ste nas kontaktirali.

Imajte na umu da je Sauer QD Hexalock nosač 30 mm prikladan za modele Sauer 100 i 101, ali također bez problema odgovara puškama istih dimenzija kao što su Mauser M18, Remington 700, Howa 1500, Mauser M96, Rosler Titan 16, Sabatti Rover LA i Haenel Jager 10. Također, obje baze i prstenovi su uključeni u nosač. Nažalost, ne odgovara za Mauser M12 jer je navedeni model istih dimenzija kao Zastava M70, Mauser M98,... Sve dostupne nosače za Mauser M12 možete pronaći ovdje: https://www.optics-trade.eu/si/mounts/shopby/suitable_for_mauser-mauser_m12.html

Hvala na razumijevanju.

Ako trebate dodatne informacije, slobodno nas ponovno kontaktirajte.

Lijepi pozdrav

Dear Sir,

thank you for contacting us.

Please note that the Sauer QD Hexalock Mount 30 mm is suitable for Sauer 100 and 101 models but also fits with no problem to rifles with the same dimensions such as Mauser M18, Remington 700, Howa 1500, Mauser M96, Rosler Titan 16, Sabatti Rover LA and Haenel Jager 10. Also, both bases and the rings are included with the mount. Unfortunately, it does not fit Mauser M12 because the mentioned model has the same dimension as the Zastava M70, Mauser M98,... You can find all the available mounts for Mauser M12 here: https://www.optics-trade.eu/si/mounts/shopby/suitable_for_mauser-mauser_m12.html

Thank you for your understanding.

If you will need any additional information please do not hesitate to contact us again.

Kind Regards

od Optics Trade team

https://www.optics-trade.eu/en/sauer-qd-hexalock-mount-30-mm-sauer-remington.html <- Ovaj artikal ima bazu + prstenove za 193 eura? a baza odgovara Mauser m18? da li Mauser m12 ima sličnu kombinaciju baza + prsten? Nisam vidio opciju za visinu prstena? Hvala unaprijed. Jurgis
https://www.optics-trade.eu/en/sauer-qd-hexalock-mount-30-mm-sauer-remington.html <- This article has base + rings for 193 euro? and the base fit Mauser m18? do Mauser m12 have a similar base + ring combo? I did not see an option for ring heights? Thank you in advance. Jurgis

od Jurgis

Poštovani gospodine, zahvaljujemo što ste nas kontaktirali. Ispričavamo se zbog kašnjenja s odgovorom, koje je rezultat povećane potražnje za našim uslugama. Ovaj nosač uključuje i prstenove i baze i prikladan je za pušku Mauser M18, ali neće odgovarati puški M12 zbog razlike u "C" udaljenosti. Zatrebate li daljnju pomoć, nemojte se ustručavati ponovno nas kontaktirati. Srdačan pozdrav,

Dear Sir, thank you for contacting us. We kindly apologize for the late reply, which is a result of the increased demand for our services. This mount includes both the rings and bases and is suitable for the Mauser M18 rifle, but will not fit the M12 rifle due to a difference in "C" distance. Should you require any further assistance, please do not hesitate to contact us again. Kind Regards,

od Optics Trade Team

pozdrav, jesu li nosači hexalock 30 mm sauer 100 dostupni za australski pozdrav.

hello, are the hexalock 30mm sauer 100 mounts available to australia regards.

od Dave

Zdravo,

ovaj proizvod trenutno nije dostupan. Rok isporuke je otprilike 4 tjedna nakon narudžbe. Možemo ih poslati u Australiju bez problema.

Hello,

this product is currently out of stock. The delivery time is approximately 4 weeks once ordered. We can ship these to Australia without a problem.

od Optics Trade team

Dolaze li šesterokutni prstenovi u različitim visinama, tj. niskim, srednjim, visokim jer sam kupio set za Mauser 98 Standard Expert i kad sam pokušao montirati Meopta 3 -18 X 50 mm ciljnik, nije t odgovarati. (Zasun se ne otvara) Vaši su me ljudi uvjeravali da će ova kombinacija funkcionirati, ali ne funkcionira. Molim prijedloge

Do the hex-a-lock rings come in various heights ie low, med, high because I bought a set for a Mauser 98 Standard Expert and when I tried to mount a Meopta 3 -18 X 50 mm scope it didn't fit. (Bolt will not open) I was assured by your people that this combination would work and it doesn't. Suggestions please

od Jim

Ovaj nosač dolazi samo u jednoj BH visini koja iznosi 18 mm. Ljubazno vas molimo da nas kontaktirate izravno na [email protected] jer ne možemo pronaći vašu narudžbu.

This mount comes only in a single BH height which is 18 mm. We would kindly ask you to contact us directly at [email protected] as we are unable to locate your order. 

od Optics Trade team

Sa sauer hexalock nosačima, kada će biti na zalihama. Recimo isporučeno za 1 mjesec ili više? Srdačan pozdrav Richard

With sauer hexalock mounts, when will they be in stock. Say shipped in 1 month or more? Kind regards Richard

od Rich

Vrijeme isporuke je otprilike 3-4 tjedna nakon narudžbe.

The delivery time is approximately 3-4 weeks once ordered.

od Optics Trade team

Pozdrav, imam pušku Sauer 100 .308. Imam Sig Electro Optics 30MM objektiv s 44MM objektivom. Trebaju mi ove baze i prstenje - možete li mi savjetovati koje. Možete mi poslati fakturu na moju e-mail adresu. Platit ću odmah i ekspresna dostava u SAD od 19,95 je u redu. Hvala

Greetings, I have a Sauer 100 .308 Rifle. I have a Sig Electro Optics 30MM scope with a 44MM Objective. I need these bases and rings - can you advise me which. You can send me an Invoice at my email address. I will pay immediately and the 19.95 express shipping to the U.S. is fine. Thank You

od JERRY

Kupnju možete obaviti na stranici u nastavku jednostavnim dodavanjem proizvoda u košaricu i praćenjem jednostavnih uputa za naplatu. Ako naiđete na probleme u vezi s tim, javite nam.

https://www.optics-trade.eu/us/sauer-qd-hexalock-mount-30-mm-sauer-remington.html

You can perform the purchase on the page below by simply adding the product to the cart and follow the simple checkout instructions. If you face trouble in this regard, please let us know.

https://www.optics-trade.eu/us/sauer-qd-hexalock-mount-30-mm-sauer-remington.html

od Optics Trade team

Bok.
Razmišljam naručiti hexalock nosač za svoj Sauer 100. Imam jedno pitanje: je li moguće promijeniti dva optika (imam 1-5 24 i 3-15 56) i ako je moguće kako Naručujem dodatno prstenje. Unaprijed hvala na odgovoru.

Hi.
I am considering to order the hexalock mount for my Sauer 100. I have one question: Is it possible to change between two scopes (I have a 1-5 24 and a 3-15 56) and if so how do I order extra rings. Thanks in advance for your reply.

od Jørgen

Sa Sauer Hexalock nosačima ne možete mijenjati prstenove.

With Sauer Hexalock mounts you are unable to switch the rings. 

od Optics Trade team

Mogu li kupiti ove ispod? Ja sam u Australiji.

Can I buy these below? I’m in Australia.

od Marc

Ovaj proizvod možemo poslati u Australiju bez problema.

We can ship this product to Australia without a problem.

od Optics Trade team

Bok,
Tražim nosač nišana hexalock koji odgovara mauser m18 action. Onaj iz mauzera odgovara samo m12/m98 jer su rupe na stražnjoj montaži bliže jedna drugoj na tim puškama u usporedbi s m18.
Ima li Sauer QD hexalock odgovarajući razmak vijaka za M18.
Hvala,
Simon.

Hi,
I am looking for the hexalock scope mount that fits the mauser m18 action. The one from mauser fits only the m12/m98 action as the rear mount tapped holes are closer together on those rifles compared to the m18. 
Does the Sauer QD hexalock have the right screw spacing for the M18.
Many thanks,
Simon.

od Thomas

Nastavak na koji mislite prikladan je za puške Sauer 100, 101, Mauser M18 i Remington 700.

The mount which you are referring to is suitable for Sauer 100, 101, Mauser M18, and Remington 700 rifles.

od Optics Trade team

Zašto odabrati Optics Trade?

  • Širok izbor proizvoda na zalihi
  • Podrška iskusnih stručnjaka
  • Vaše zadovoljstvo nam je na prvom mjestu

Recenzije & Preporuke

1 ocjene
Imate več iskustvo sa tim proizvodom?
Drago bi nam bilo da ocijenite ovaj proizvod:
Ocijenite proizvod

How do you rate this product?

Hexalock podešavanje Hexalock adjustment

Sustav je dobar i kvalitetno napravljen, ali u usporedbi s drugima nije ga tako lako instalirati ili čak koristiti. Prethodno sam imao EAW nosače na svom Sauru 200 za koje smatram da su daleko bolji. Trenutačno je moj Hexalock prednji prsten labav i neuredan i borim se da shvatim kako ga prilagoditi tako da dobro pristaje poput nosača stražnjeg prstena. Zagubio sam metalnu šipku od 2 mm, ali upute su nejasne, ...vjerojatno ih je napisao inženjer koji je dizajnirao sustav, a ne netko tko ga mora koristiti bez prethodnog uvida. Nije jasno koristi li se metalna šipka od 2 mm za okretanje imbus vijka ili za primjenu pritiska za otpuštanje opruge ili za podešavanje napetosti na neki način. Bez metalne šipke i jasnih uputa ili dijagrama to je u najboljem slučaju samo nagađanje. frustrirajuće je to što nema YouTube videozapisa o tome i nije lako stupiti u kontakt s proizvođačem. Nije nešto što očekujete od nosača nišana od 450 USD.
The system is good and well made but compared to others it isn't so easy to install or even use. I previously had EAW mounts on my Saur 200 which I feel are far superior. Currently my Hexalock front ring is loose and sloppy and I am struggling to understand how to adjust it so it fits snug like the rear ring mount. I have misplaced the 2mm metal rod but instructions are vague, ...likely written by an engineer who designed the system and not by someone who has to use it with no prior insight. It's unclear if the 2mm metal rod is used to turn an allen grub screw or apply pressure for some spring release or to adjust tension somehow. Without the metal rod and any clear instruction or diagram it is a guess at best. the frustrating part is that there are no YouTube videos on doing it and its not easy to get in contact with manufacturer. Not something you expect from a $450 scope mount.

Review by

Posted on

Datoteke korisnika

Osobna iskustva drugih korisnika mogu nekome puno pomoći. Dijeljenjem svojih snimaka, fotografija i mišljenja o proizvodima pomažete budućim kupcima u lakšoj odluci.

Filtriraj:
Sortiraj:

Dodatne informacije

Tražite korisne dokumente u vezi s ovim proizvodom? Pronađite ih ovdje:

Objave

Pogledajte ostale kreirane sadržaje povezane s odabranim proizvodom: