Blaser nosači

Skidajući nosači

Ponovljivi nosači

Standardizovani nosači

Blaser QD Saddle Mount, 30mm

Na zalihi

Blaser Saddle Mount, 30mm

Blaser QD Saddle Mount, 30mm

(2 ocjene)

As low as: 399,00 EUR

BH visina

Vrijeme otpreme

Slanje - 1 do 3 dana

Mogućnost povrata

15 dana

Proizvodi na zalihama

Status

BH visina

Cijena

Kupnja

Na zalihi

18 mm

399,00 €

Na zalihi

21.5 mm

399,00 €

Pomoć oko dostave

Odaberite zemlju dostave i pružatelja dostave

Vaša odabrana lokacija bit će spremljena i dok pregledavate druge proizvode. Prilikom završetka kupnje moći ćete birati između više vrsta plaćanja.

Vraćanje kupljene robe Dostava i slanje Korištenje garancije

Korisnička pomoć

TREBATE POMOČ?

Naš iskusni tim spreman vam je pomoći kroz cijeli proces, od kupnje do korištenja proizvoda. Ako imate pitanja, molimo vas da nas kontaktirate.

Kontaktirajte nas

Blaser QD Saddle Mount, 30mm Opis proizvoda

Introduction

Blaser is a firearms manufacturing company with headquarters in Isny im Allgäu, Germany. It was founded in 1957 by Horst Blaser. In 1997, it merged with SIGARMS – the production; however, remained autonomous. Today, they mainly produce bolt-action rifles, shotguns, combination guns and single shot rifles.

Blaser has revolutionized the way riflescopes are mounted on the rifles by introducing a unique mounting system. Most Blaser rifles (R8, R93, B95/B97, D99, K95, S2, BBF95/97 and many others) have four notches on the barrel, the dimensions of which are the same on every Blaser rifle that uses this mounting system. Blaser is one of the first rifle manufacturing companies that introduced the barrel-mounting system.

Blaser's Saddle mount

Blaser's Saddle mount, robust and reliable, offers a 100 % repeatability, meaning that it can be removed and put back onto the rifle without having to re-zero. It can withstand the recoil of all the calibers, even the most powerful ones. To indicate that they are original, all the new mounts made by Blaser have “Blaser” engraved into the steel at the bottom part of the mount.

The bases of the Blaser's Saddle mounts are made from steel while the rings are made from aluminum. To mount it on the rifle, the user has to follow a very specific mounting procedure. First, the Saddle mount with the locking levers open has to be placed into the four notches on the barrel of the Blaser rifle. Once on, the levers have to be folded inwards to fix the mount in place. With a standard precision screwdriver, the clamping force has to be adjusted (it is important to use a precision screwdriver since the bigger ones can leave scratches on the surface). Unlike other similar mounts, the Saddle mount does not feature locking screws which is pretty unusual. Once the clamping force is adjusted, the screws will remain in that position. Blaser Saddle mounts are very compact and of an elegant shape.

It is important to note that once a Blaser mount is mounted on the rifle, it cannot be used on any other Blaser rifle as it will either clamp with too much force or it will be too loose (there is a possibility that the mount will fit on another rifle but that seldom happens).

The ring mounts are available in five diameters: 25.4, 30, 34, 36 and 40 mm. The ones with the diameter of 25.4, 30 and 34 mm can be bought in 2 BH heights while the ones with the diameter of 36 and 40 mm are only available in one BH height. The base measures 11 mm in height. For riflescopes with objective lens diameter up to 50 mm, the lower BH height is recommended (in cases where there are two heights to choose from). For riflescopes with an objective lens diameter of 56 mm and those with a clip-on attached to the objective, the higher BH height is recommended.

Mounting instructions

First, the user has to place the mount on the rifle with the locking levers open so that it fits into the four notches on the barrel. The rifle has to be fixed into position, preferably placed into a rifle holder. Once the levers are folded inwards, the user tightens the screw on the right side of the mount, adjusting the clamping force. It has to be tightened to the point where it is fixed but not all the way to the end. Once the riflescope is put into the ring mount, no lapping is required. Blaser claims that the user does not have to glue the rings, even though some gunsmiths, following the tradition, prefer to glue them to prevent movement. The recommended tightening torque is 2.2 Nm.

Warranty

The product has a warranty period of 10 years.

Opća svojstva

Proizvođač	Blaser
Serija montaže	Blaser Saddle Mounts
Izrađeno u	Njemačka
Jamstvo	10 godina
SKU	C8800000c

Fizička svojstva

Umetak (KR)	KR 25.5 mm
Nagib nosača	0 MOA
Nastavitev po smjeri	Ne
Vrsta nišanskog uređaja	30 mm
Promjer cijevi	30
Kut	0°
Nagib	No
Boja	Crna
Materijal	Čelik
Dužina	115.00 mm
Težina	204.00 g

Characteristics

Suitable for Compatibility Below	Blaser BB 97, Blaser R8, Blaser R93, Blaser BBF 95, Blaser BBF 97, Blaser BD 14, Blaser BS 97, Blaser D99, Blaser K95, Blaser S2, Blaser BS 95, Sauer 505, Blaser Mounting Standard, Jakele J1
Suitable for Compatibility Above	30 mm

Najčešća pitanja (Q&A)

Trebate li pomoć? Jeste li sigurni da je ovo pravi proizvod za vas? Ne oklijevajte - postavite pitanje našoj ekipi, koja je tu da vam pomogne oko pitanja o proizvodu.

Hey,

I have a Blaser R93. What height do I need for the next scope; Vortex Viper HS-T 6-24×50 Scope, VMR-1 (MRAD)? 15 or 18mm.

Kind regards.

od Jeroen

Dear Sir!

You will need 15mm height but you can check such setup on the following link bellow. The scope is unfortunately not the Vortex Viper HS-T 6-24x50 but in terms of dimensions it is almost identical:

https://optics-trade.eu/configurator/view?id=0f9c921b-0f60-4de5-91d4-618181155334

You can see the clearance between the action, the scope belly and between the objective bell and the barrel clearly.

Slike

od Optics Trade team

potreba montiranja Himicro steller 3.0 termalnog na R8 currant nosač je predaleko naprijed

need to mount a Himicro steller 3.0 thermal to an R8 currant mount is too far forward

od Damon

Dragi gospodine Damon,

hvala što ste nas kontaktirali.

Blaser Saddle nosač približit će vaš nišan Stellar 3.0 oku nego klasični nosač bez produžetka.

Ako imate dodatnih pitanja ili nedoumica, ne ustručavajte se kontaktirati nas izravno na [email protected]. Ovdje smo da pomognemo.

Lijepi pozdrav,

Dear Mr. Damon,

thank you for contacting us.

The Blaser Saddle mount will bring your Stellar 3.0 scope closer to the eye than a classic mount with no extension.

If you have any further questions or concerns, please do not hesitate to contact us directly at [email protected]. We are here to help.

Kind Regards,

od Optics Trade team

Trebam Blaser Saddle Mount, 30 mm za moj Blaser K95. Opseg koji želim staviti na njega je Swarovski Z6 2.5-15x56 - Plex - 59511 . Postoje 3 opcije - koja odgovara mom opsegu?

I need Blaser Saddle Mount, 30mm for my Blaser K95. The scope I want to put on it is a Swarovski Z6 2.5-15x56 - Plex - 59511 . There 3 options- which on fit my scope?

od Guy

Dragi momče,

hvala što ste nas kontaktirali.

Preporučamo BH visinu od 18 mm za vaše postavke.

Ako imate dodatnih pitanja ili nedoumica, ne ustručavajte se kontaktirati nas izravno na [email protected]. Ovdje smo da vam pomognemo.

Lijepi pozdrav,

Dear Guy,

thank you for contacting us.

We would suggest the BH height of 18 mm for your setup.

If you have any further questions or concerns, please do not hesitate to contact us directly at [email protected]. We are here to help.

Kind Regards,

od Optics Trade team

ovaj je postav optika brzo odvojiv i odgovara Blaseru r8?

this scope setup is quick detachable and fits a blaser r8?

od don

Dragi Don,

hvala na vašoj poruci.

Da, brzo se odvaja i odgovara pušci Blaser R8.

Zahvaljujemo na razumijevanju i slobodno nam se obratite na [email protected] ako vam možemo pomoći na bilo koji drugi način.

Lijepi pozdrav

Dear Don,

thank you for your message.

Yes, it is quick detachable and fits the Blaser R8 rifle.

Thank you for your understanding and please do not hesitate to contact us at [email protected] if we can assist you in any other way.

Kind regards

od Optics Trade team

Pozdrav, imam nekoliko Zeiss Victory HT 2.5-10x50 i 3-12x56 nišana, čija visina ugradnje je potrebna 15,5 mm ili 18 mm? Hvala

Hi I have a couple of Zeiss Victory HT 2.5-10x50 and a 3-12x56 scopes, which build height is required 15.5mm or 18mm? Thanks

od John

Dragi John,

hvala na vašoj poruci.

Za 2,5-10x50 potreban vam je 15,5 mm BH, a za 3-12x56 potreban vam je 18 mm BH.

Zahvaljujemo na razumijevanju i slobodno nam se obratite na [email protected] ako vam možemo pomoći na bilo koji drugi način.

Lijepi pozdrav

Dear John,

thank you for your message.

For the 2.5-10x50 you need the 15.5mm BH, and for the 3-12x56 you need the 18 mm BH.

Thank you for your understanding and please do not hesitate to contact us at [email protected] if we can assist you in any other way.

Kind regards

od Optics Trade team

Bok ekipo, nosač je stigao danas, savršen. Hvala vam.

Hi team, mount arrived today, perfect. Thank you.

od John

Bok, trebam odstojnike i duže vijke za nosač na sjedalu. Kako izračunati njegovu cijenu? Hvala vam

Hi, i need spacers and longer screws for saddle mount. How math its cost? Thank you

od Ado

Dragi Ado,

hvala na vašoj poruci.

Ovdje možete pronaći Blaser odstojnik i uključeni vijak: https://www.optics-trade.eu/en/blaser-ring-mount-riser-1x.html

Zahvaljujemo na razumijevanju i slobodno nam se obratite na [email protected] ako vam možemo pomoći na bilo koji drugi način.

Lijepi pozdrav

Dear Ado,

thank you for your message.

Here you can find the Blaser spacer and the screw included: https://www.optics-trade.eu/en/blaser-ring-mount-riser-1x.html

Thank you for your understanding and please do not hesitate to contact us at [email protected] if we can assist you in any other way.

Kind regards

od Optics Trade team

Poštovani gospodine, upravo ću naručiti Blaser nosač za sedlo, 30 mm, za moj Hikmicro Alpex A50T Odgovara li ovaj nosač BH 15,5 ili 18 mm za lopaticu, jer postoji mali trbuh od 5 mm ispod tube of the scoop Lijepi pozdrav Dirk

Dear sir, I’am about to order the Blaser saddle mount, 30 mm, for my Hikmicro Alpex A50T Does this mount BH 15,5 or 18 mm fit for the scoop, because there is little belly of 5 mm underneed the tube of the scoop Kind Regards Dirk

od Dirk

Dragi Dirk,

hvala što ste nas kontaktirali.

Preporučujemo da nabavite sljedeći nosač koji je napravljen za noćno gledanje/termalne nišane:

- https://www.lovskatrgovina.si/slo/innomount-for-blaser-pulsar-digex.html

Ako vam je potrebna dodatna pomoć, nemojte se ustručavati ponovno nas kontaktirati.

Lijepi pozdrav.

Dear Dirk,

thank you for contacting us.

We would recommend you get the following mount which is made for night vision/thermal scopes:

- https://www.lovskatrgovina.si/slo/innomount-for-blaser-pulsar-digex.html

Should you require any further assistance, please do not hesitate to contact us again.

Kind regards.

od Optics Trade team

Pozdrav, je li moguće poslati Blaser nosač za sjedište za Blaser R8 (30 mm prstenovi) u SAD (Kalifornija). Koliki je PDV i dostava? Hvala Ruediger

Hi, Is it possible to ship a Blaser saddle mount for a Blaser R8 (30 mm rings) to the US (California). How much is the VAT and Shipping? Thanks Ruediger

od Ruediger

Poštovani gospodine,

hvala na vašoj poruci.

Žao nam je što vas obavještavamo, ali zbog propisa proizvođača nismo u mogućnosti slati Blaser proizvode u SAD i CAD.

Ispričavamo se zbog mogućih neugodnosti i razumijemo da bi ovo moglo biti razočaravajuće.

Ako imate dodatnih pitanja ili nedoumica, slobodno nas kontaktirajte na [email protected] i mi ćemo se potruditi da vam pomognemo.

Lijepi pozdrav

Dear Sir,

thank you for your message.

We are sorry to inform you, but due to the manufacturer's regulations, we are unable to ship Blaser products to the USA and CAD.

We apologize for any inconvenience this may cause and understand that this may be disappointing.

If you have any further questions or concerns please don't hesitate to contact us at [email protected] and we will do our best to assist you.

Kind regards

od Optics Trade team

bok, imam nišan Steiner Ranger 4, 2,5 x10 x50, trebaju mi uključeni blaserovi prstenovi za brzo montiranje, odgovara li ovaj nišan i r8 profesionalni uspjeh? Također mi treba neka preklopna navlaka za zaštitu leća nišana i prsten za pričvršćivanje za Leica Calonox ..rusan arm 52.58? hvala vam puno.

hi, i have a scope Steiner Ranger 4, 2.5 x10 x50, i need a blaser quick mount rings included, is this one fit for the scope and r8 professional success gun? i also need some flip cover for protect the lenses of the scope, and an attachment ring for Leica Calonox ..rusan arm 52.58? thank you very much.

od ioan

Poštovani gospodine,

hvala što ste nas kontaktirali.

Napominjemo da sve tražene proizvode možete pronaći na našoj web stranici ovdje:

- Blaser Saddle Mount, 30mm< /span>

- Steiner Flip Up Cover Set Ranger 4 2.5-10x50

- Rusan Q-R adapter za Dedal 540-552, Jahnke, Lahoux (veličina 57,5 mm)

Zahvaljujemo na razumijevanju.

Ako su Vam potrebne bilo kakve dodatne informacije, nemojte se ustručavati ponovno nas kontaktirati.

Lijepi pozdrav

Dear Sir,

thank you for contacting us.

Please note you can find all of the requested products on our website here:

- Blaser Saddle Mount, 30mm

- Steiner Flip Up Cover Set Ranger 4 2.5-10x50

- Rusan Q-R adapter for Dedal 540-552, Jahnke, Lahoux (Size 57.5mm)

Thank you for your understanding.

Should you require any additional information please do not hesitate to contact us again.

Kind regards

od Optics Trade team

Bok, dolazi li ovo u 15 ili 18 mm? Imate li ove na zalihi? Trebalo bi to poslati na poštanski sandučićBelconnen ACT 2616

Hi, Does this come in 15 or 18mm? Do you have these in stock? Would need it posted to Po boxBelconnen ACT 2616

od Paul

Poštovani gospodine,

hvala što ste nas kontaktirali.

Dostupne su dvije različite visine prstena, dakle opcija od 15 i 18 mm. Za dostupnost ovih nosača kontaktirajte nas na [email protected]

Lijepi pozdrav

Dear Sir,

thank you for contacting us.

There are two different heights of rings available, hence the 15 and the 18 mm option. For the availability of these mounts, please contact us at [email protected]

Kind regards

od Optics Trade team

Namjeravam naručiti Blaser Saddle s prstenovima od 30 mm. Hoće li visina od 15,5 ili 18 mm izdržati objektiv od 56 mm? Što predlažete?

I’m about to order Blaser Saddle with 30mm rings. Will the 15.5 or 18.mm height handle a 56mm scope objective? What you suggest?

od Nikola

Poštovani gospodine,

hvala što ste nas kontaktirali.

Prema dostavljenim informacijama, preporučili bismo vam visinu BH od 18 mm. Trebao bi vam omogućiti dovoljan razmak između cijevi puške i objektiva nišana.

Zahvaljujemo na razumijevanju.

Ako trebate bilo kakve dodatne informacije, slobodno nas ponovno kontaktirajte.

Želim vam ugodan dan.

Dear Sir,

thank you for contacting us.

According to the provided information we would recommend you the 18mm BH height. It should provide you with enough clearance between the rifle's barrel and the riflescope's objective.

Thank you for your understanding.

Should you require any further information please do not hesitate to contact us again.

Have a nice day ahead.

od Optics Trade team

Dobro jutro, koju visinu prstenova trebam kupiti za Swarovski Z6i 2,5-15 x 56 za montažu na Blaser k95? hvala ti puno Maurilio

Buon giorno, quale altezza degli anelli devo acquistare per un Swarovski Z6i 2.5-15 x 56 da montare su un Blaser k95 ? grazie mille Maurilio

od Maurilio

Poštovani gospodine,

hvala što ste nas kontaktirali.

Bilo koja visina trebala bi funkcionirati na vašem Blaser K95 s ovim Swarowski nišanom. Ako više volite da vaš nišan bude postavljen što je moguće niže, preporučujemo da odaberete konfiguraciju od 15,5 mm.

Ako vam je potrebna dodatna pomoć, nemojte se ustručavati kontaktirati nas ponovo.

Lijepi pozdrav

Dear Sir,

thank you for contacting us.

Either of the heights should work on your Blaser K95 with this Swarowski scope. If you prefer your scope mounted as low as possible, we recommend choosing a 15.5 mm configuration.

Should you require any further assistance, please do not hesitate to contact us again.

Kind regards

od Optics Trade team

Možete li mi reći koji bi nosač i visina bili najbolji za moj R8 da pristane na Pulsar XQ50? Hvala

Can you please let me know which mount and height would be best for my R8 to fit a Pulsar XQ50? Thanks

od Paul

Poštovani gospodine,

hvala što ste nas kontaktirali.

Molimo vas da nam dostavite točan model vašeg Pulsar uređaja i mi ćemo vam preporučiti ispravan nosač. Možete nas kontaktirati na [email protected]

Zahvaljujemo na razumijevanju.

Ako trebate bilo kakve dodatne informacije, nemojte se ustručavati ponovno nas kontaktirati.

Lijepi pozdrav

Dear Sir,

thank you for contacting us.

We would kindly like to ask you to provide us with the exact model of your Pulsar device and we will recommend you the correct mount. You can contact us at [email protected]

Thank you for your understanding.

If you will need any additional information please do not hesitate to contact us again.

Kind Regards

od Optics Trade team

Blaser Saddle Mount, 30 mm, samo potvrđujem da odgovara/stane na Blaser R93.

Blaser Saddle Mount, 30mm, just confirmng this suits/fits on a Blaser R93.

od LEON

Ovaj nosač definitivno odgovara Blaser R93, Blaser R8 i mnogim drugim Blaser puškama.

This mount definitely suits Blaser R93, Blaser R8, and many other Blaser rifles.

od Optics Trade team

Namjeravam naručiti Blaser Saddle s prstenovima od 30 mm. Hoće li visina od 15,5 odgovarati Swaro objektivu od 50 mm?

I’m about to order Blaser Saddle with 30mm rings. Will the 15.5 height handle a Swaro 50mm objective?

od Ian

Visina BH od 15,5 mm udobno će raditi s vašim Swarovski objektivom od 50 mm.

The 15.5 mm BH height will comfortably work with your 50 mm objective Swarovski riflescope.

od Optics Trade team

Bok, postavit ću Zeiss 6-24x56 (30 mm) na Blaser T8 9,3x62. Želio bih upotrijebiti originalni Blaser nosač za sjedalo, ali koju visinu trebam upotrijebiti? Pozdrav

Hi, Im going to mount a Zeiss 6-24x56 (30 mm) to a Blaser T8 9,3x62. I would like to use the original Blaser saddle mount but what high should I use ? Regards

od Neil

Visina BH za vašu konfiguraciju trebala bi biti 18 mm.

The BH height for your configuration should be 18 mm.

od Optics Trade team

Ime

Question

Send me an email when answer is posted

I want to subscribe to Optics Trade newsletter

I am interested in:

Lov

Taktičko i sportsko streljaštvo

Promatranje ptica i prirode

Prilozi

Drag your file(s) here or click to browse

Only YouTube and Vimeo links are supported.

+ Add another link

Zašto odabrati Optics Trade?

Širok izbor proizvoda na zalihi
Podrška iskusnih stručnjaka
Vaše zadovoljstvo nam je na prvom mjestu

Recenzije & Preporuke

2 ocjene

5 zvjezdica 1

4 zvjezdice 0

3 zvjezdice 1

2 zvjezdice 0

1 zvjezdica 0

Imate več iskustvo sa tim proizvodom?
Drago bi nam bilo da ocijenite ovaj proizvod:

Ocijenite proizvod

How do you rate this product?

Ocjena

1 star 2 stars 3 stars 4 stars 5 stars

Nickname

Summary

Review

Drag your file(s) here or click to browse

Only YouTube and Vimeo links are supported.

+ Add another link

Blaser prstenovi za montažu na sedlo od 30 mm sa Zeiss Victory HT opsegom. Blaser saddle mount 30mm rings with Zeiss Victory HT scope.

Montaža mog Zeiss Victory HT 2.5-10x50 na Blaser sedlo s visinom od 15,5 mm je savršena. Zeiss Victory HT 3-12x56 na Blaser nosaču na sedlu s visinom izrade od 18 mm savršen je. Blaser nosač je osnovni i vjerojatno najbolja opcija.

Mounted my Zeiss Victory HT 2.5-10x50 on Blaser saddle mount with 15.5mm build height is perfect. Zeiss Victory HT 3-12x56 on Blaser saddle mount with 18mm build height is perfect. Blaser mount is basic and probably the best option.

Review by John

Posted on 27. 11. 2024.

4 4

Vrlo pozitivan odnos prema kupcu.

Zelo pozitiven odnos do kupca.

Review by Tomaž

Posted on 12. 01. 2024.

Datoteke korisnika

Osobna iskustva drugih korisnika mogu nekome puno pomoći. Dijeljenjem svojih snimaka, fotografija i mišljenja o proizvodima pomažete budućim kupcima u lakšoj odluci.

Dodatne informacije

Tražite korisne dokumente u vezi s ovim proizvodom? Pronađite ih ovdje:

Catalog 2018 SLIDES

Catalog 2018 PDF

Video

Za dodatne informacije pogledajte naše video sadržaje o odabranom proizvodu:

Objave

Pogledajte ostale kreirane sadržaje povezane s odabranim proizvodom:

Blaser QD Saddle Mount, 30mm

Vrijeme otpreme i dostave

Povrati

Proizvodi na zalihama

Status

BH visina

Cijena

Kupnja

Pomoć oko dostave

Odaberite zemlju dostave i pružatelja dostave

Promjena lokacije

Korisnička pomoć

Blaser QD Saddle Mount, 30mm Opis proizvoda

Introduction

Blaser's Saddle mount

Mounting instructions

Warranty

Opća svojstva

Fizička svojstva

Characteristics

Najčešća pitanja (Q&A)

Slike

Slike

Video

Odgovori

Prilozi

Uploaded files

Slike

Video

Odgovori

Prilozi

Uploaded files

Slike

Video

Odgovori

Prilozi

Uploaded files

Slike

Video

Odgovori

Prilozi

Uploaded files

Slike

Video

Odgovori

Prilozi

Uploaded files

Ask question

Prilozi

Uploaded files

Pretplatite

Zašto odabrati Optics Trade?

Recenzije & Preporuke

How do you rate this product?

Uploaded files

Datoteke korisnika

Prenesi fotografiju/videozapis

Uploaded files

Dodatne informacije

Video

Objave

Ostavite nam poruku

Lista želja